Pigs On The Wing BBQ
Master Chef
Drilled four holes in the rotis ring and installed stainless hardware. for 1/4" Used high temp silicone on the 1/4X20 stainless hardware to prevent rust.
Have yet to take it for a test drive. Might work, might not. Think I'll try it with a Brinkman charcoal pan as a water pan in the middle of the charcoal grate with lump around it first. I used 3/4' long bolts, cuz I had them on hand, a 1/4" bolt would be fine. Just be sure the flat side of the nut is on top. That's where the grate will sit on. Before drilling, measure three times, drill once.
Have yet to take it for a test drive. Might work, might not. Think I'll try it with a Brinkman charcoal pan as a water pan in the middle of the charcoal grate with lump around it first. I used 3/4' long bolts, cuz I had them on hand, a 1/4" bolt would be fine. Just be sure the flat side of the nut is on top. That's where the grate will sit on. Before drilling, measure three times, drill once.
